ABOUT CIWI
Water treatment runs on chemistry. Today that chemistry arrives by truck, often from far away. That is expensive, bad for the climate and fragile: if a delivery is delayed, treatment stops. CIWI turns this around. Our electrochemical systems produce the chemistry at the treatment plant itself, from just salt, steel and electricity. They are used for drinking water, wastewater, industrial water and desalination. CIWI was founded out of TU Delft and YES!Delft and is based at the Molengraaffsingel in Delft.
THE ROLE
We design, build and test machines for water treatment plants that run 24/7, for the drinking water and sanitation of millions of people. As a mechanical engineer you work on the full journey: you design a system in SolidWorks, select the pumps, valves and sensors, work with suppliers on how the HDPE reactor tanks are made, and you are there when the system is installed in the field. Something not working? You go there and fix it.
A WEEK COULD LOOK LIKE THIS
- Monday: you are at a pilot installation in the field. Something is off, and you find out what together with the team.
- Tuesday: you work on the solution.
- Wednesday: you design the next system in SolidWorks.
- Thursday: you build the fix for Monday's problem.
- Friday: you help build the next system, due for delivery in a few months.
A design that looked brilliant in week 1 can be outdated by week 2. We are fine with that. It is how we learn fast, and we are looking for people who enjoy that.
WHAT YOU DO
- Design: create designs and technical drawings in SolidWorks, from reactor tank to piping.
- Pump selection: choose the right pump, build the system curve and check the operating point on the pump curve.
- Valves and piping: decide which valves are needed (shut-off, check and control valves) and how the PVC piping runs.
- Sensor integration: work out how to place and orient sensors inline so they measure reliably and stay accessible for maintenance.
- Manufacturing and purchasing: align with suppliers on how your design is made and purchase the other components.
- Build: help assemble systems in HDPE and PVC.
- Field work: join pilots to troubleshoot, measure and improve.
WHO WE ARE LOOKING FOR
- A degree in Mechanical Engineering (or similar); work experience in the sector is a plus.
- Good working knowledge of SolidWorks.
- Basic knowledge of flow and hydraulics: reading a pump curve does not scare you.
- Practical: you would rather see a design work than have it perfect on paper.
- You don't mind changing plans when practice shows something different.
- Experience with plastic piping, plastic welding or water technology is a bonus, not a requirement.
WHAT WE OFFER
- €2,800 – €3,500 gross per month, depending on experience
- 25 holidays + 13 ADV days (because you work 40 hours instead of 38)
- Collective agreement (CAO) Metaal & Techniek, including pension
- Option to receive company stock options
- A young, fast-growing company where you learn every week and get responsibility quickly
- Work that matters: every system you build helps deliver clean water
APPLY
Send your CV to [email protected], with a few photos or drawings of something you have designed or built. A school or hobby project is fine too.
Not sure you meet every requirement? No need to doubt. We mainly look at what you have built, your motivation and how you approach problems.
Full vacancy (brochure, in Dutch):
https://www.linkedin.com/posts/chemical-innovations-in-water-industries_vacture-werktuigbouwkundige-ciwi-november-activity-7523699862853275648-2pJr
.png)
.png)